Top Sell 810nm Diode Laser Factory Wholesale Hair Reomoval Machine Permanent Hair Removal
- Type:LASER
- Place of Origin:CN;GUA
- Q-Switch:no
- Model Number:BR318
- Brand Name:Beir
- Style:stationary
- Feature:Anti-Hair Removal
- Feature:Hair Removal
- Feature:Skin Rejuvenation
- Feature:Tattoo Removal
- Feature:Wrinkle Remover
- Certification:CE
- Laser Type:810nm laser
- Laser type:810nm semiconductor laser beam soure
- Laser wavelength:810nm
- Input power:2000W
- Spot size:10x12 mm2
- Pulse width:10-200ms adjustable
- Energy density:0-150J/ cm2
- Frequency:1-10Hz (continuous mode)
- Cooling system:water cooling + wind cooling + semiconductor
- Temperature of probe:0~40°C
- Fuse:Max 10A
Top Sell 810nm Diode Laser Factory Wholesale Hair Reomoval Machine Permanent Hair Removal
(810nm laser hair removal)
Treatment Principle:
Diode laser hair removal technology is based on the selective dynamics of light and heat. The laser goes through the skin surface to reach the root of hair follicle; light can be absorbed and converted into heat damaged hair follicle issue, so that hair loss regeneration without injury surrounding tissue. It provides less pain, easy operation, the safest, techology for permanent hair removal now.
Diode laser machine adopts 808 nm, particular effective to hair melanocytes without injury surrounding tissue. The laser light can be absorbed by the melanin in hair follicles, and converted into heat, thus increasing the hair follicle temperature. When the temperature raises high enough to irreversibly damage the hair follicle structure, the hair will disappear after a period of natural physiological of hair follicles and thus achieve the purpose of permanent hair removal.
Specification for BR318
Laser Type | High Quality 810nm Semiconductor laser beam soure |
Wave Length | 810nm |
Output | 810nm Treatment of handle out direct output mode (hand gun type) |
4.Mode | Single Pulse and Continuous pulse |
Frequency | 1~10Hz |
Pulse Width | 10-200 ms |
Spot Size | 10x12 mm² |
Energy Density | 0-150J/cm2 |
Electrical Requirement | AC 220V±10% 50Hz; AC 110V±10% 60Hz |
Cooling System | water cooling + wind cooling + Semiconductor |
Temperature | 0-40℃ |
Input Power | 2000W |
Fuse | Max10A |
Gross weight | 60KGS |
Details of the 810nm hair removal machine:
Application:
1.Permenent hair removal, better than IPL and E-light; Remove hair on different part of body effectively. Such as armpit hair , beard, lip hair, hair line, bikini line, body hair and other unwanted hair.2.Also Relieve symptoms of speckle, telangiectasis, deep color naevus, spider lines, red birthmark and so on.
Features:
1. With Sapphire Crystal on the treatment head that can be used forever without replacement;
2. Powerful semiconductor cooling, air cooling and water cooling can ensure longer working time.
3. Water cycle& water temperature checking system and powerful abstractor extend the service life and safety for the machine;
4. Short treatment time and quick recovery have little effect on patients’ daily work.
5. Advanced flash computer calculater: xenon lamp computer calculater system always show how many flashes you have used.
6. Easier installation: plug-and-play connectors.
7. Minimum energy loss: ceramic silver-gilt lumen refelcts diffuse light onto laser rod to produce stronger power.
8. Medical CE approval, ISO9001:2008.
Therapy steps:Introduction for the hair removal machines:
Therapy steps:
1: Cleaning:
Before do treatment, clean and disinfect the treatment area;
2: Shaving hair away:
For better energy transmit to skin, need to shave the exposed hair away;
3: Daub cooling gel:
Cooling gel can reduce discomfort during treatment, so before start treatment daub proper cooling gel onto treatment area (normal 2mm thickness);
4: Set parameters for device:
Gradually set pulse width and corresponding power, frequency to achieve the best user experience;
5: Hair depilation:
The method to do hair depliation: the hand-piece (sapphire) is stick to skin tightly, and sliding 6-7 times back and forth; during this treatment, observe the changes of skin: if skin no obvious changes,need to increase power until user feels hot and the skin on treatment area appears flushed;
6: Cleaning and Ice compress:
After do treatment, clean again the treatment area, and do ice compress to partial skin for 10-15 minutes if needed; for device, return to menu from treatment screen, turn off device with key switch and clean the sapphire with tissue;
Cautions before and after therapy:
1: One month before treatment, pay attention to the sunscreen;
2: Two weeks before treatment, the treatment area does not remove hair with plucking out, with cream or electrolysis ;
3: Two days before and after treatment, to avoid chemical or mechanical stimulation;
4: Two weeks before and after treatment, to disable the filling or other injection, etc the kind of interventional therapy;
Before and After Hair Removal Photos:
Therapy periods:
Underarm, Face: One Therapy interval---4-6 weeks;Arms and legs, body: One Therapy Interval----4-6 weeks;Treatment Period: 3-5 times;
Cautions after treatment:
1: After finished treatment, the treatment area will feel slightly scorching hot and skin around hair follicles appears erythema, which is normal phenomenon, do ice compress to partial skin for 10-15 minutes if needed;
2: the residual hair on treatment area can pull out in 24 hours or automatically fall off in several days;
3: The current day of treatment, use low temperature water to wash and use liquid skin care products;
4: After treatment, pay attention to protecting moisture and sunscreen;
